Pipe Welders, Pipe Fitters, Coded Welders & Telehandlers

Recruiter
Fulcrum Engineering
Location
Norwich
Posted
14 Feb 2018
Closes
16 Mar 2018
Sector
Engineering
Contract Type
Permanent
Hours
Full Time
Fulcrum Engineering , are acting as an Employment Business on behalf of our Clients. We are proud to be an Equal Opportunities Employer. We are currently recruiting personnel for our Clients in the Kings Lynn area plus other areas such as Norwich, Cantley, Wissington, Wisbech, areas and others such as, at all levels who are qualified/skilled/experienced as

JOB SPEC DETAILS

We are recruiting for our Clients in the highly skilled & experienced Skilled & Semi Skilled Trades

Tele Handler Drivers

Driving Tele Handler Fork Lift, on Sites.
Moving pipe work, steel work
Unloading vehicles
Assisting Riggers & Trades with work, as required
Current CPCS Card Cert

Pay From £13 + hr £16 hr after 47.5 hrs & Sat £19.50 per hr Sun

Rigger Erectors

Rigging - Slinging of materials & equipment
Lifting work into position
Moving pipe work, steel work
Unloading vehicles
Assisting Trades with work, as required
Ideally with Current CPCS Card Cert

Pay From £16 + hr £20 hr after 47.5 hrs & Sat £23.50 per hr Sun

Pipe Fitter Fabricator/ Welders TIG - MMA

Working in the Work - Fab Shop and on Site Work, working from drawings and fabricating pipe work mainly.

Measuring, marking out, fabricating of pipe work and welding.
Working from Isometric & General Engineering Drawings
Welding to Coded Specs, on 1 - 4 inch stainless & carbon pipe, mainly with TIG
Also MMA on larger 4 -m 12 inch carbon pipe work.

Pipe Welders TIG - MMA

Working in the Work - Fab Shop and on Site Work, working from drawings and welding pipe work mainly.

Working from Isometric & General Engineering Drawings
Welding to Coded Specs, on 1 - 4 inch stainless & carbon pipe, mainly with TIG
Also MMA on larger 4 - 12 inch carbon pipe work.
Ideally with current Weld Certs TIG stainless & carbon pipe
Ideally MMA on 6 inch carbon pipe.

Pipe Fitter Fabricators - Fabricating, fitting, welding dairy and process pipe work mainly.
Setting up butts or flanges ready for welding
Also working on tanks and supports etc
Also cutting out old sheet, plate, pipe and completing repairs & mods.
Working for Isometric & Engineering Drawings

Pipe Fitter Welders - fabricating, fitting, welding dairy and process pipe work and welding using mainly TIG.
Also working on tanks and supports etc
Also cutting out old sheet, plate, pipe and completing repairs & mods.

Vessel Fabricators
Measuring, marking out, fabricating vessel, tanks, pipe etc from drawings.
Using rollers, press, plasma etc, plus some tack welding.
Also cutting out old sheet, plate, pipe and completing repairs & mods.

We are recruiting for our Clients in the highly skilled & experienced Welders TIG Able to fabricate frames, box, channel etc from drawings. Also drill and fit components to drawings. Who could start asap. Must be able to Weld to high Spec on plate, structural steel work. Welding of steel work using TIG/MIG mainly.

.

Fabricator/ Welders TIG - MIG

Working in the Work - Fab Shop and on Site Work, working from drawings and fabricating steel work mainly. Also some fabricating of pipe work and welding.
Working on specialised productions such as one offs or small batches of bespoke fabrications such as - Metal Balconies, Stair Ways etc Able to fabricate tubing, frames, angle, box, etc from drawings. Who could start asap. Must be able to Weld to high Spec on sheet metal, tubing plate, structural steel work. Welding of steel work using MIG mainly. Using Grinders & Polishers to complete Also drill and fit components to drawings.

Plater Welders and Sheet Metal Fabricator/ Welders TIG - MIG

Working on specialised bespoke productions such as one offs or small batches of bespoke fabrications such as -
Sheet Metal Tables, Guards, Chutes, Hoppers, Conveyors, Frames Stair Ways etc Able to fabricate tubing, frames, angle, box, etc from drawings. Who could start asap. Must be able to Weld to high Spec on sheet metal, tubing plate, structural steel work. Welding of steel work using TIG mainly. However will also need to weld in MIG Using Grinders & Polishers to complete work to mirror finish ! Also drill and fit components to drawings.

Fabricator/ Welders MMA - MIG

Working in the Work - Fab Shop and on Site Work, working from drawings and fabricating steel work mainly. Also some fabricating of pipe work and welding.
Also working on specialised productions such as one offs or small batches of bespoke fabrications such as - Metal Balconies, Stair Ways etc Able to fabricate tubing, frames, angle, box, etc from drawings. Who could start asap. Must be able to Weld to high Spec on sheet metal, tubing plate, structural steel work. Welding of steel work using MMA & MIG mainly. Using Grinders & Polishers to complete Also drill and fit components to drawings

Quals = C & G - NVQ 3 in Sheet Metal Work or Plating or Welding Hours of Work = (Apply online only) Mon - Fri plus O/T if required plus (Apply online only) Sat plus Sun if required. Working in the Fab Shops & Sites, ideally living in a 20 mile radius There will also be the strong likelihood of working extra O/T where required.

Ideally with CSCS Cards, or Safety Passport &
Abrasive Wheels, Confined Space, Fire Watching, First Aid Certs, would be helpful

Term of Work = 6 - 12 weeks pos long term subject to work load
Pay Rates Depending on Skills & Quals and Area

PAY RATES FOR VARIOUS SKILLED TRADES

Pipe Fitters or Pipe Welders = £16 + per hr 40 hrs
Skilled Sheet Metal Fabricator Welders TIG & MIG , & Skilled TIG - MIG Welder Fabs = Pay = £12 - 14.00 + per hr on Basic 40 hours based Mon - Fri £14 - 16 per hr above 40 hours & Sat per hr Sat - Night Shift Pay will be £1.50 - 2 per hr more

Also Required

We are recruiting for our Clients in the highly skilled & experienced

Semi Skilled & Mates - Steel Work Fabricators & Polishers Will be assisting Fabricators & Welders with marking out, cutting to length tubing, sheet, angle , balustrade, hand rails, stair ways, walk ways etc Using Grinders & Polishers to complete work to mirror finish !

Quals = C & G - NVQ 3 in Sheet Metal Work or Plating or Welding Hours of Work = (Apply online only) Mon - Fri plus (Apply online only) Sat plus Sun if required. Working in the Fab Shops & Sites, ideally living in a 20 mile radius There will also be the strong likelihood of working extra O/T where required.

Term of Work = 6 - 12 weeks pos long term subject to work load
Pay Rates Depending on Skills & Quals and Area
Skilled Sheet Metal Fabricator Welders TIG & MIG , & Skilled TIG - MIG Welder Fabs

Skilled Pay = |£13 - 15 per hr plus O/T Rates
Semi- Skilled = Pay = £10 - 11.50 + per hr on Basic 60 hours based Mon - Fri PLUS POS per hr Sat - Night Shift Pay will be £1.50 - 2 per hr
Production Welder TIG - MIG = Pay = £9 - 10.00 + per hr on Basic 60 hours based Mon - Fri Semi Skilled & Mates = £8.50 + Ltd

For more information on this position, please email your CV in Word, quoting job title, your name in the subject box of the email. Please note that if you have not been contacted within 14 days, your application for this position has been unsuccessful on this occasion. However you may still be considered for other positions in the future. Fulcrum Engineering , are only able to process applications from candidates who are currently resident and eligible to work in the UK and works successfully with an extensive list of local businesses, providing an honest, ethical and professional service to both candidates and clients

Similar jobs

Similar jobs